Design center
Learning center
Complex battery design – handy tips before starting out
March 12, 2010
Gordon Clements, Sales and Marketing Manager of VARTA Microbattery, outlines some key hints and tips that every electronics design engineer should follow to help them make their battery design easier to implement within the overall product they are designing.
Gordon Clements, Sales and Marketing Manager of VARTA Microbattery, outlines some key hints and tips that every electronics design engineer should follow to help them make their battery design easier to implement within the overall product they are designing.
- New power semiconductors cut data center energy
- Power Tip 21: Watch That Capacitor RMS Ripple Current Rating!
- Offline bus converter module maximizes system efficiency, minimizes heat losses
- Point-of-Load: One for All
- Smart drivers reduce energy use and PCB clutter in portable electronic systems
- Tips for charging from USB sources (Part 1 of 2)
- Motor control in air conditioners with dual sensor less FOC and active PFC
- Intelligent Interleaving: improving energy efficiency in AC-DC power supplies
- Efficient architectures move sources closer to loads
- Increase efficiency of street-light solar panels using a maximum peak-power tracker
"Energy Aware" Appliance Platform: A New Approach To Home Energy Control
Fri, 12 Feb 2010 16:24:00 GMT
Fears of global climate changes and limited resources have increased energy awareness and conservation by both consumers and utilities. This trend will have a dramatic impact on consumer products as homeowners search for electrical appliances that are both energy efficient and cost effective. Given the lengthy development cycles for new products, now is the time to build energy awareness directly into next-generation products.
- An Alternative Approach to Higher-Power Boost Converters
- Intelligent Digital Power Management
- Fast, Easy, and Flexible Power for System Designers
- Simple Calibration Circuit Maximizes Accuracy in Li-Ion Battery Management Systems
- Isolated Supply Overview and Design Trade-Offs
- LED Reference Design Cookbook
- Create an Inverting Power Supply From a Step-Down Regulator
Today's news
- Nanotech fuels high-density power source
- ST-Ericsson selects first ESL power analysis software tool
- Enhanced software guides designers to select power supply capacitors
- Lidow returns with 'disruptive' GaN startup
- Integrated lithium-ion battery protection circuit and safety monitor is unveiled by Analog Devices
- Q-Cells International became largest PV system integrator in 2009
- Silicon-based anodes for next generation Li-ion batteries pass performance milestone
- NXP in talks on solar cell manufacture at Nijmegen
- University of Central Florida researchers verify large-format solid-state battery breakthrough from Planar Energy
- Morgan Technical Ceramics aims to pioneer energy harvesting research
New Products
- 1/8 brick power module optimizes 5-V bus voltage to match load
- Thinnest wafer-level chip-scale N-Channel MOSFETs extend battery life
- Heavy-duty rectifier/charger powers 120-V batteries
- PowerDI5 bipolars offer space saving solutions
- Heavy-duty 1600-W power supply supports 1U applications
- Switch-mode standalone battery charge controllers provide faster, cooler charging
- Li+ battery charger features GSM test mode in a TDFN package
- CSEM develops ultra low power DSP RISC cores
- UltraVolt extends microsize high-voltage power supply family
- 75 to 200-W power supplies meet latest Energy Star requirements
Next events
November 23, 2010 to
November 25, 2010
Exhibitions
SPS-Drives - Nuremberg
November 09, 2010 to
November 12, 2010
Exhibitions
electronica - Munich
October 20, 2010 to
October 21, 2010
Exhibitions
Embedded Live conference - London
October 20, 2010 to
October 21, 2010
Exhibitions
ESC - London
September 29, 2010 to
September 30, 2010
Exhibitions
RFID Europe - Cambridge
MOST POPULAR NEWS
- 1/8 brick power module optimizes 5-V bus voltage to match load
- Thinnest wafer-level chip-scale N-Channel MOSFETs extend battery life
- Heavy-duty rectifier/charger powers 120-V batteries
- PowerDI5 bipolars offer space saving solutions
- Heavy-duty 1600-W power supply supports 1U applications
- Switch-mode standalone battery charge controllers provide faster, cooler charging
- Li+ battery charger features GSM test mode in a TDFN package
- CSEM develops ultra low power DSP RISC cores
- UltraVolt extends microsize high-voltage power supply family
- 75 to 200-W power supplies meet latest Energy Star requirements
Interview
Technical papers
- "Energy Aware" Appliance Platform: A New Approach To Home Energy Control
- An Alternative Approach to Higher-Power Boost Converters
- Intelligent Digital Power Management
- Fast, Easy, and Flexible Power for System Designers
- Simple Calibration Circuit Maximizes Accuracy in Li-Ion Battery Management Systems
- Isolated Supply Overview and Design Trade-Offs
- LED Reference Design Cookbook
- Create an Inverting Power Supply From a Step-Down Regulator
Poll
Ipsum
MSC Vertriebs
Energy Efficient
Battery
Lorem
Automotive
IMS Research
Linear Technology
Power Supply
Lattice
EETimes Europe
Adipiscing
Maxim Integrated Products
Ericsson Power Modules
Sit Amet
Consectetuer
Batteries
MOSFET
Dolor
Texas Instruments
Power Management
Power
PFC
Atmel
Power Factor Correction
STMicroelectronics
Analog Devices
PMBus
Fairchild Semiconductor
Elit
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
