Home »
New Products
9 to 14 GHz power amplifiers boast on chip power detectors
August 01, 2012 | Jean-Pierre Joosting | 222904936
Hittite Microwave Corporation has introduced two 2 W GaAs pHEMT MMIC power amplifiers which cover the 9 to 14 GHz frequency range and are ideal for microwave radio, military and space, SATCOM and test and measurement applications.
The HMC952 and the HMC952LP5GE are four stage GaAs pHEMT MMIC 2-W medium power amplifiers with temperature compensated on chip power detectors which operate between 9 and 14 GHz. These amplifiers provide 33 dB of gain, +35 dBm of saturated output power, and 27% PAE (Power Added Efficiency) from a +6 V supply.
With up to +43 dBm output IP3 the HMC952LP5GE is ideal for high linearity applications in military and space as well as high capacity point-to-point and point-to-multi-point radios. These powerful amplifiers also feature I/Os that are internally matched to 50 Ohms and require no external matching components which makes them ideal for use as drivers, or as the final power stage in a microwave transmitter chain.
The HMC952 die may be easily incorporated into MCMs, while the HMC952LP5GE leadless QFN 5 x 5 mm surface mount packaged version is compatible with high volume assembly equipment. Both amplifer versions are a much smaller alternative to bolt down power amplifier solutions, and complement Hittite’s unmatched selection of active and passive components for microwave and millimeterwave radio applications.
www.hittite.com
With up to +43 dBm output IP3 the HMC952LP5GE is ideal for high linearity applications in military and space as well as high capacity point-to-point and point-to-multi-point radios. These powerful amplifiers also feature I/Os that are internally matched to 50 Ohms and require no external matching components which makes them ideal for use as drivers, or as the final power stage in a microwave transmitter chain.
The HMC952 die may be easily incorporated into MCMs, while the HMC952LP5GE leadless QFN 5 x 5 mm surface mount packaged version is compatible with high volume assembly equipment. Both amplifer versions are a much smaller alternative to bolt down power amplifier solutions, and complement Hittite’s unmatched selection of active and passive components for microwave and millimeterwave radio applications.
www.hittite.com
Please login to post your comment - click here
Related News
- 500-W GaN L-Band amplifier ideal for radar applications
- 96 percent efficient 1-MHz buck converter demonstration board features eGaN FETs
- Self-powered DC panel mount voltmeter suits battery monitoring
- Intelligent power modules offer enhanced system reliability performance
- Switches cover DC to 6 GHZ for applications up to 50 through to 200 W
- High-power 30-dB broadband coupler
- Step dimming function is controlled through AC power switch
- High linearity power amplifiers boost cellular base station effectiveness
- Arivus connects LED lighting to Powerline Communications
- LED and OLED professionals discuss technology trends at Bregenz symposium
MOST POPULAR NEWS
- Touch screen technology goes behind the display
- Japan prepares to become world's largest solar revenue market in 2013
- Smart grid sensor market looks set to double in size by 2014
- Single-chip solar energy harvester operates wireless mesh nodes
- Bosch drives down fuel consumption - in a salami technique
- World's lowest power Bluetooth smart chip is unveiled
- Ceramic material drastically shrinks power supplies
- Lithium-ion batteries withstand 10.000 charging cycles
- Solar industry capital spending hits seven-year low in 2013 but upturn is on the cards
- 300 percent increase in battery life with low power Bluetooth wireless speaker module
Interview
Technical papers
- 60V Buck-Boost Controller Drives High Power LEDs
- Energy Measurement and Security for the Smart Grid
- Dangers of Aftermarket Counterfeit Battery Packs
- High Voltage Surge Stoppers Ensure Reliable Operation During Power Surges
- Motor-Drive Design made Simple
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V
- Derating of Schottky Diodes
- Heatsink Optimization
- High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput
Poll
Texas Instruments
Power Supply
Microcontroller
IMS Research
Solar
UPS
Vishay Intertechnology
STMicroelectronics
Microcontrollers
International Rectifier
Power
Power Supplies
Intersil
Photovoltaic
Fairchild Semiconductor
MOSFET
Batteries
Analog Devices
Analog
Linear Technology
Energy Harvesting
GaN
Battery
NXP Semiconductors
MOSFETs
Smart Grid
Power Management
Diodes
Maxim Integrated Products
National Semiconductor
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.


