Market News
Crystalline PV module profits drop to single digits
June 26, 2012 | Paul Buckley | 222904790
Market analyst, IMS Research is reporting that average gross profits of crystalline photovoltaic (PV) industry module manufacturers dropped to nine US cents per watt in the first quarter of 2012.
The fall is forecast to put pressure on suppliers according to the latest quarterly report from IMS Research.
As a result of continued price pressure and highly competitive market conditions throughout the PV industry, gross profits are forecast to continue to fall further to just seven cents per watt by the end of 2012.
IMS Research reveals that following a year of rapid price declines, when average crystalline PV module prices fell by nearly 50 percent, industry gross profits fell below $500 million in Q1’12, the lowest level since 2008 and more than 75 percent lower year-on-year. The cause of this rapid deterioration is simply due to costs not falling as quickly as prices. Whilst average crystalline PV module prices fell by 67 cents per watt in 2011, average costs per watt reduced by just 42 cents.
“Profit margins have been the victim as suppliers have been forced to engage in a fierce price war and have reduced prices faster than they have been able to reduce their costs,” commented IMS Research’s Senior Market Analyst Sam Wilkinson. “High inventory levels, weak demand and reduced government support for PV have all contributed to a rapid downward spiral for PV module prices.”
The narrowing gap between prices and costs has resulted in the average gross profit per watt of crystalline modules falling from 39 US cents to just nine cents in one year. One key reason that suppliers have been unable to reduce their costs quickly enough is that average polysilicon prices have not declined as quickly as module prices.
“Although spot prices for polysilicon have quickly fallen over the last year, a large proportion of polysilicon is purchased under long-term agreements, and it has taken some time for suppliers to cancel or renegotiate supply contracts in order to reflect these reductions in spot prices. If we consider this mix of spot and contract prices, on average polysilicon prices fell far less than modules in 2011,” added Wilkinson.
Gross margins are forecast to stabilize at nine percent on average in the second half of 2012, with further price declines offset by significant improvements in non-silicon processing costs and continued declines in blended silicon purchase prices, which are projected to reach $25/kg in Q3’12.

Visit IMS Research at www.imsresearch.com
As a result of continued price pressure and highly competitive market conditions throughout the PV industry, gross profits are forecast to continue to fall further to just seven cents per watt by the end of 2012.
IMS Research reveals that following a year of rapid price declines, when average crystalline PV module prices fell by nearly 50 percent, industry gross profits fell below $500 million in Q1’12, the lowest level since 2008 and more than 75 percent lower year-on-year. The cause of this rapid deterioration is simply due to costs not falling as quickly as prices. Whilst average crystalline PV module prices fell by 67 cents per watt in 2011, average costs per watt reduced by just 42 cents.
“Profit margins have been the victim as suppliers have been forced to engage in a fierce price war and have reduced prices faster than they have been able to reduce their costs,” commented IMS Research’s Senior Market Analyst Sam Wilkinson. “High inventory levels, weak demand and reduced government support for PV have all contributed to a rapid downward spiral for PV module prices.”
The narrowing gap between prices and costs has resulted in the average gross profit per watt of crystalline modules falling from 39 US cents to just nine cents in one year. One key reason that suppliers have been unable to reduce their costs quickly enough is that average polysilicon prices have not declined as quickly as module prices.
“Although spot prices for polysilicon have quickly fallen over the last year, a large proportion of polysilicon is purchased under long-term agreements, and it has taken some time for suppliers to cancel or renegotiate supply contracts in order to reflect these reductions in spot prices. If we consider this mix of spot and contract prices, on average polysilicon prices fell far less than modules in 2011,” added Wilkinson.
Gross margins are forecast to stabilize at nine percent on average in the second half of 2012, with further price declines offset by significant improvements in non-silicon processing costs and continued declines in blended silicon purchase prices, which are projected to reach $25/kg in Q3’12.

Visit IMS Research at www.imsresearch.com
Please login to post your comment - click here
Related News
- u-blox to develop 3G HSPA module based on Intel's XMM 6255 HSPA platform
- Tightly knit network to cure range angst, study says
- Imec and Renesas collaborate on ultra-low power short range radios
- EU antidumping duties could block Chinese modules out of the European Market
- Solar PV wafer production to grow 19 percent in 2013, forecasts NPD Solarbuzz
- Large-scale grid integration of variable photovoltaic power offers new possibilities
- Automotive 3-phase power module enables higher torque systems for lower fuel consumption
- New growth opportunities for Electroactive Polymers
- Top 20 Solar PV module suppliers capture 70 percent market share in first quarter of 2013 reports NPD Solarbuzz
- IEEE802.11a/b/g/n Compatible WLAN-module supports data rates up to 150Mbps
MOST POPULAR NEWS
- KTH The Royal Institute of Technology develops world's first water-activated charging device for mobile phones
- Volvo evaluates flywheel hybrid drive - fuel savings of up to 25%
- PV storage market is set to grow to USD19bn by 2017
- Energy harvesting wireless switch transmits on-off data over a 300m range at 868MHz
- Accutronics offers new custom battery service
- Nordic Semiconductor releases world's smallest Bluetooth low energy and ANT+ ICs
- Power-One enters into patent license agreement with Microchip
- Quad-MOSFET solution boosts efficiency and eliminates heat sinking in active bridge applications
- Advanced microcontroller combines floating point and low leakage technology to achieve longest battery lifetime in portable applications
- Market for GaN and SiC power semiconductors set to rise by factor of 18 in next decade
Interview
Technical papers
- High Voltage Surge Stoppers Ensure Reliable Operation During Power Surges
- Motor-Drive Design made Simple
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V
- Derating of Schottky Diodes
- Heatsink Optimization
- High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput
- Waste heat replaces batteries
- Stepper Motor Control IC
- 50Ω Gain Block IF Amplifier
Poll
Power
Analog
UPS
MOSFETs
Texas Instruments
Smart Grid
NXP Semiconductors
Solar
Microcontroller
Linear Technology
STMicroelectronics
Maxim Integrated Products
Vishay Intertechnology
Analog Devices
Power Supply
National Semiconductor
Photovoltaic
IMS Research
SoC
Fairchild Semiconductor
Intersil
Batteries
Energy Harvesting
Battery
Diodes
Microcontrollers
MOSFET
Power Supplies
Power Management
International Rectifier
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.


