New Products
Flexible 365-W low profile power supplies offer short lead times
May 31, 2011 | Paul Buckley | 222902765
Gresham Power Electronics is able to offering short lead times on the company’s HD365 series of high-density AC to DC switch-mode power supplies. The HD365 claims to provide a class leading 365 W in the industry standard 76.2 x 127 mm (3 x 5 inch) footprint. With a height of 33 mm (1.30 inch) the power supplies are ideally suited for low profile, 1U High applications.
The Gresham Power HD365 range of single-output power supplies offer standard output voltages of 12, 24 and 48 VDC and may be used as bulk converters in a wide range of applications.
The HD365 series utilizes the latest technologies and advanced switching topologies to deliver operational efficiencies up to 90% with a power density exceeding 18 W/in3, setting the standard for low and medium range power products. Standard features include: universal AC Input (85 to 264 VAC), active power factor correction (EN61000-3-2 Class D Compliant) and protection against over-temperature, over-current and over-voltage conditions.
The HD365 has safety approvals for: Information Technology Equipment (ITE), (UL/cUL60950-1 / EN60950-1), Medical (UL/cUL 60601-1 / EN60601-1), is CE marked (LVD), and conforms to FCC / EN55022 Level B Emission Standards.
The HD365 Series offers reliable performance, high MTBF and is ROHS compliant. This series is ideal for a wide range of applications which include: Front-ends for Distributed Power Architecture (DPA or IBA) in telecom, industrial, military COTS, medical and scientific instrumentation.
Visit Gresham Power at www.greshampower.com
The HD365 series utilizes the latest technologies and advanced switching topologies to deliver operational efficiencies up to 90% with a power density exceeding 18 W/in3, setting the standard for low and medium range power products. Standard features include: universal AC Input (85 to 264 VAC), active power factor correction (EN61000-3-2 Class D Compliant) and protection against over-temperature, over-current and over-voltage conditions.
The HD365 has safety approvals for: Information Technology Equipment (ITE), (UL/cUL60950-1 / EN60950-1), Medical (UL/cUL 60601-1 / EN60601-1), is CE marked (LVD), and conforms to FCC / EN55022 Level B Emission Standards.
The HD365 Series offers reliable performance, high MTBF and is ROHS compliant. This series is ideal for a wide range of applications which include: Front-ends for Distributed Power Architecture (DPA or IBA) in telecom, industrial, military COTS, medical and scientific instrumentation.
Visit Gresham Power at www.greshampower.com
Please login to post your comment - click here
Related News
- Imec and Renesas collaborate on ultra-low power short range radios
- PIN power diodes combine low recovery losses and softness for efficiency and low EMI
- sureCore receives £250 000 SMART Award to prototype low power SRAM technology
- Miniature 30-V MOSFETs claim industry-leading RDS(ON) performance
- Highest power GaN in Plastic transistors target radar and communications systems
- Amantys partners Fuji Electric to launch IGBT gate drivers for wind and solar markets
- Ultra-low noise, high PSRR linear voltage regulators reduce jitter, simplify power design
- 2-kVA frequency converter delivers clean sine-wave output from generator voltage
- Altera acquires power technology innovator Enpirion
- Non-contact current probes target advanced power designs
MOST POPULAR NEWS
- KTH The Royal Institute of Technology develops world's first water-activated charging device for mobile phones
- Volvo evaluates flywheel hybrid drive - fuel savings of up to 25%
- PV storage market is set to grow to USD19bn by 2017
- Energy harvesting wireless switch transmits on-off data over a 300m range at 868MHz
- Accutronics offers new custom battery service
- Nordic Semiconductor releases world's smallest Bluetooth low energy and ANT+ ICs
- Power-One enters into patent license agreement with Microchip
- Quad-MOSFET solution boosts efficiency and eliminates heat sinking in active bridge applications
- Advanced microcontroller combines floating point and low leakage technology to achieve longest battery lifetime in portable applications
- Market for GaN and SiC power semiconductors set to rise by factor of 18 in next decade
Interview
Technical papers
- High Voltage Surge Stoppers Ensure Reliable Operation During Power Surges
- Motor-Drive Design made Simple
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V
- Derating of Schottky Diodes
- Heatsink Optimization
- High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput
- Waste heat replaces batteries
- Stepper Motor Control IC
- 50Ω Gain Block IF Amplifier
Poll
Solar
International Rectifier
MOSFETs
UPS
MOSFET
Vishay Intertechnology
Photovoltaic
Power Supplies
Power
Diodes
Batteries
Power Supply
Analog Devices
Battery
Power Management
Microcontrollers
National Semiconductor
Energy Harvesting
Fairchild Semiconductor
Linear Technology
Microcontroller
NXP Semiconductors
Intersil
Analog
SoC
STMicroelectronics
IMS Research
Texas Instruments
Smart Grid
Maxim Integrated Products
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
