Home »
New Products
High voltage inverting charge pumps offer low input and output ripple
May 09, 2012 | Paul Buckley | 222904570
Linear Technology Corporation has released two versatile high voltage charge pumps. The LTC3261 is a high voltage inverting charge pump that can deliver up to 100 mA of output current.
The LTC3260 has the same charge pump as the LTC3261, but also includes both positive and negative LDO regulators that can source up to 50 mA output current each.
The negative LDO post regulator is powered from the inverting charge pump output.
The positive and negative LDO output voltages can be adjusted down to 1.2 V and -1.2 V, respectively using external resistor dividers. Both devices operate over a wide 4.5 V to 32 V input voltage range.
The internal charge pump of the LTC3260 and LTC3261 function in either low quiescent current Burst Mode operation or low noise constant frequency mode at up to 88% efficiency. In Burst Mode operation the charge pump output regulates to –0.94 V IN.
Also, in Burst Mode operation the LTC3261 draws only 60 μA of quiescent current, while the LTC3260 draws 100 μA with both LDOs enabled. Constant frequency operation offers low input and output ripple; in this mode the charge pump produces an output equal to –V IN and operates at a fixed 500 kHz or to a programmed value between 50 kHz to 500 kHz using an external resistor.
Other IC features include low external parts count with ceramic capacitor stability, soft-start circuitry to prevent excessive current flow during start-up, plus short circuit and thermal protection.
The LTC3260 and LTC3261 are well-suited for a variety of applications such as low noise bipolar/inverting supplies from a high voltage input, industrial/instrumentation low noise bias generators, portable medical equipment and automotive infotainment systems.
Availability and Pricing
The LTC3260 is available in a low-profile (0.75 mm) 3 mm x 4 mm 14-lead DFN package and a 16-lead MSOP package, both with a backside thermal pad. The LTC3261 is available in a 12-lead MSOP package with backside thermal pad. For both devices, the E- and I-grade operating junction temperature is -40 to +125°C. 1000-piece pricing for the E grade starts at $3.40 each for the LTC3260 and $2.87 each for the LTC3261. Both devices are available from stock.
More information about the LTC3260 and LTC3261 high voltage charge pumps
www.linear.com/product/LTC3260 and www.linear.com/product/LTC3261
The negative LDO post regulator is powered from the inverting charge pump output.
The positive and negative LDO output voltages can be adjusted down to 1.2 V and -1.2 V, respectively using external resistor dividers. Both devices operate over a wide 4.5 V to 32 V input voltage range.
The internal charge pump of the LTC3260 and LTC3261 function in either low quiescent current Burst Mode operation or low noise constant frequency mode at up to 88% efficiency. In Burst Mode operation the charge pump output regulates to –0.94 V IN.
Also, in Burst Mode operation the LTC3261 draws only 60 μA of quiescent current, while the LTC3260 draws 100 μA with both LDOs enabled. Constant frequency operation offers low input and output ripple; in this mode the charge pump produces an output equal to –V IN and operates at a fixed 500 kHz or to a programmed value between 50 kHz to 500 kHz using an external resistor.
Other IC features include low external parts count with ceramic capacitor stability, soft-start circuitry to prevent excessive current flow during start-up, plus short circuit and thermal protection.
The LTC3260 and LTC3261 are well-suited for a variety of applications such as low noise bipolar/inverting supplies from a high voltage input, industrial/instrumentation low noise bias generators, portable medical equipment and automotive infotainment systems.
Availability and Pricing
The LTC3260 is available in a low-profile (0.75 mm) 3 mm x 4 mm 14-lead DFN package and a 16-lead MSOP package, both with a backside thermal pad. The LTC3261 is available in a 12-lead MSOP package with backside thermal pad. For both devices, the E- and I-grade operating junction temperature is -40 to +125°C. 1000-piece pricing for the E grade starts at $3.40 each for the LTC3260 and $2.87 each for the LTC3261. Both devices are available from stock.
More information about the LTC3260 and LTC3261 high voltage charge pumps
www.linear.com/product/LTC3260 and www.linear.com/product/LTC3261
Please login to post your comment - click here
Related News
- Low-power wireless projected to make waves in remote controls according to IMS Research
- Integrated PFC IC for compact consumer products
- 36-V digital potentiometers support wide signal swings and high power-supply voltages
- Driver chip features primary-side peak-current mode for high-brightness LEDs
- Floating surge stopper provides unlimited overvoltage protection
- sureCore receives £250 000 SMART Award to prototype low power SRAM technology
- Highest power GaN in Plastic transistors target radar and communications systems
- Ultra-low noise, high PSRR linear voltage regulators reduce jitter, simplify power design
- 100 W RF amplifier designed for jamming applications
- Gallium nitride delivers 97.5 percent efficiency in PFC-corrected supply
MOST POPULAR NEWS
- Volvo evaluates flywheel hybrid drive - fuel savings of up to 25%
- PV storage market is set to grow to USD19bn by 2017
- Ultra-low-power SoC supports world's smallest Bluetooth location stickers
- Power-One enters into patent license agreement with Microchip
- Quad-MOSFET solution boosts efficiency and eliminates heat sinking in active bridge applications
- Solar industry capital spending hits seven-year low in 2013 but upturn is on the cards
- Market for GaN and SiC power semiconductors set to rise by factor of 18 in next decade
- Imec and Renesas collaborate on ultra-low power short range radios
- Advanced microcontroller combines floating point and low leakage technology to achieve longest battery lifetime in portable applications
- World's lowest power Bluetooth smart chip is unveiled
Interview
Technical papers
- Dangers of Aftermarket Counterfeit Battery Packs
- High Voltage Surge Stoppers Ensure Reliable Operation During Power Surges
- Motor-Drive Design made Simple
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V
- Derating of Schottky Diodes
- Heatsink Optimization
- High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput
- Waste heat replaces batteries
- Stepper Motor Control IC
Poll
Analog
Energy Harvesting
National Semiconductor
UPS
Vishay Intertechnology
Power Management
MOSFETs
Intersil
Texas Instruments
Solar
Smart Grid
STMicroelectronics
GaN
Microcontrollers
Microcontroller
Photovoltaic
Fairchild Semiconductor
International Rectifier
Linear Technology
Maxim Integrated Products
Diodes
NXP Semiconductors
IMS Research
MOSFET
Batteries
Power Supply
Power Supplies
Analog Devices
Battery
Power
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.


