IC family reduces switching regulator output ripple and harmonics by 60-db at high frequencies
The new MIC94300 /MIC94310 were developed to provide more efficient noise suppression for today’s highly sensitive data and image capturing systems. The MIC94300 integrates a low-RDSon, current-limit switch and a low-pass filter that passes DC and blocks the AC component of the input voltage. The MIC94310 is a high-performance, low dropout regulator that offers better PSRR performance from DC to 5 Mhz than discrete solutions.
Both ICs feature an active-high enable pin for power sequencing. This first-of-a-kind IC family is ideal for today’s most demanding portable applications, including smart phones, medical imaging, tablets/ notebooks/webcams, digital still and video cameras, bar code scanners, GPS and image system processors for image sensors.
Micrel’s new Ripple Blocker technology improves minimum detectable signal capturing for low-light image sensors by suppressing system power ripple for the Image System Processor (ISP). By eliminating the large LC filter that would typically be required to reduce ripple in a discrete solution, the MIC943XX series devices provide more usable board space to accommodate space-constrained designs. In addition, this new series offers an operating input range of 1.8 V to 3.6 V with exceptional transient performance, ultra-low dropout and very high PSRR (80 db @ 1 Khz).
The MIC94300 and the MIC94310 devices deliver up to 200 mA; higher-current devices are under development. Both ICs offer full current and thermal fault condition protection and the MIC94310 offers ultra-low dropout (17 mV, typical). The devices also feature a -40 to 125ºC junction temperature range. Package options include 0.88 x 0.88 mm, 4-bump CSP and 1.2 x 1.6 mm Thin-MLF.
The Ripple Blocker family solutions will be previewing at the 2012 APEC Conference, Orlando, Florida, USA,held February 5-9, 2012, booth number 411-413.
Availability and Pricing
The series is currently available in volume, and pricing starts at $0.24 for 1K quantity for the MIC94300 and $0.27 for the MIC94310.
More information about the MIC943XX evaluation board at
- Cadence/Tensilica shapes DSP IP for low-energy SoC implementations
- 40V regulators simplify power provision for industrial designs
- Low operating-current shunt regulator betters 431 specs, replaces Zeners
- GaN LNA meets need for high RF power survivability
- 200W, 98%, buck-boost regulators in 10x14mm module format
- High power low-pass filters handle up to 2500 W
- Linear adds micro-module regulators with 60V/4A & 36V/8A buck-boost types
- Software simulation of ST power devices, by free download tool
- Wide Vin, four-switch buck-boost DC/DC offers efficiency with reduced EMI
- 30A high integration DC/DC for FPGA point-of-load regulation
- LDO regulator has ultra-low noise, high PSRR, for sensitive RF applications
- Bluetooth SoCs target ultra-low power Blue Gecko applications
- CMOS-LDOs improve drop-out and noise at 300mA output
- 'New class' of 650V IGBTs cuts switching losses over 50 Hz to 20 kHz
- Automotive-grade buck regulator delivers 3A
- Bias power made easy
- Revealed - The real impact of battery bounce testing
- Will energy-saving lightbulb become graphene's first commercial success?
- Polymer discovery paves way for low-cost ultrafast batteries
- Has Google entered the battle for next-generation batteries?
- How to get higher efficiency at lower loads: A new LLC platform makes it possible
- Medical devices: Where wireless charging has real impact
- WPT breaks all connections, Part 3
- Quick-charging hybrid supercapacitor trumps thin-film lithium battery
- Can fast-charging aluminum-ion battery dampen safety fears?
- Power grids - How many EVs can be charged simultaneoulsy?
- Will metal-free catalyst lower rechargeable zinc-air battery costs?
- Power management design for single-cell battery system
- How can iron fluoride triple energy storage in batteries?
- MIT pinpoints promising pathways for solar photovoltaic power
- Battery Management System Tutorial
- High Performance Portable DC Bench Power Supply: Save Money and Free Up Bench Real Estate by Building Your Own
- A Four-Quadrant DC/DC Switching Regulator Smoothly Transitions from Positive to Negative Output Voltages for FPGA and Other Applications
- Investigating Die attach Failure in IGBTs using Power Cycling Tests
- Power Systems Design eBook
- Wireless Power User Guide
- A Novel Approach to Industrial Rectifier Systems