Isolated RS485 & RS232 uModule transceivers target military and automotive applications
The LTM2881 single RS485 and LTM2882 dual RS232 transceivers break ground loops by isolating the logic level interface and line transceiver using internal inductive signal isolation . This allows for a much larger common- mode voltage range plus superior common mode rejection >30 kV/us. A low EMI, 1 W DC/DC converter generates the power supplies for driving RS485 or RS232 levels and provides an additional isolated 5 V supply output for powering any supporting external components.
With 2,500 V RMS of galvanic isolation, onboard secondary power, and fully compliant transmitters and receivers, the LTM2881 and LTM2882 require no external components, providing complete, compact µModule solutions for isolated serial data communications. The H- and MP-grade versions are guaranteed over operating ambient temperatures from -40 to 105°C and -55 to 105°C, respectively.
More information about Linear Technology's military grade flow at www.linear.com/docs/Quality/mpgrade.pdf
- Multiple-output automotive regulator IC with buck/boost capability
- HV protection diodes are automotive-rated, in small outline
- Automotive battery stack monitor achieves 0.04% measurement accuracy
- Automotive PMIC runs ECUs in difficult power conditions
- 500 mA, 140V Boost/SEPIC/Flyback/Inverting DC/DC: IQ = 6µA
- Digi-Key’s pushes IDT’s wireless power reference kits through hackster
- Harsh-environment high input voltage, high output current linear regulator
- 38V dual PMBus DC/DC controller with current mode control
- Lowest-drift bandgap voltage reference reaches 1.5ppm/°C, offers low dropout
- Is ethylene carbonate the key to extending battery life?
- R&D centre investigates flow cell applications
- A new measure for wireless power transfer to support highly efficient links
- Can candle soot help power Electric Vehicles?
- Heat helps rechargeable batteries extend lifetimes
- Invisibility cloak focuses on enhancing solar cell efficiency
- Internet blackouts by 2020, warns nanoelectronics book
- Huawei reveals rapid charge batteries: 50% capacity charged in minutes
- Want longer lasting lithium ion batteries? Just add hydrogen
- Will solar cells power a Li-FI revolution?
- 48V system achieves near full-hybrid characteristics
- Tandem thin film solar cells add perovskite to boost efficiency
- Perovskite advance targets long-wavelength sunlight to boost solar cell efficiency
- Universal wireless charger meets multiple standards
- London black cabs begin journey towards battery power
- IDT to acquire ZMDI for $310million
- PoWiFi optimizes energy harvesting to power IoT sensors
- A4WP and PMA combine for create AirFuel Alliance
- Sub-threshold logic MCU maker claims low-power benchmark lead
- Reducing data centre energy consumption on three levels
- Harvest more energy from photons to improve solar cells and li-fi
- Battery Size Matters
- Isolation in AC Motor Drives: Understanding the IEC 61800-5-1 Safety Standard
- Multichemistry Buck Battery Charger Controller
- Why Making the Move from a Variable Transformer to a VariPLUS is the Right Decision
- Determine Balancing Current for the LTC3305 Lead-Acid Battery Balancer
- Testing PSRR with High-Frequency Ripple
- A SEPIC Fed Buck Converter