New Products
Snap-in and hybrid lithium-ion cylindrical ultracapacitors help to tailor power solutions
April 18, 2012 | Paul Buckley | 222904463
Cornell Dubilier Electronics, Inc. has released the company's Type CDLC, CarbonCap Double Layer Capacitors, and Type CDHC hybrid ultracapacitors which offer high performance benefits to help tailor power solutions.
Cornell Dubilier's lineup of large cell cylindrical ultracapacitors spans 1200 to 3000 farads and includes snap-in style ultracapacitors from 100 to 600 farads and higher energy hybrid capacitors from 220 to 1000 farads.
CDHC Hybrid Capacitors are half ultracapacitor and half lithium ion battery. The hybrid capacitors store more than twice the energy of typical ultracapacitors and have high cycle life capability compared to batteries. Hybrid capacitors have more power than lithium ion batteries, but less energy storage. By comparison, ultracapacitors have a cycle life capability of a million cycles or more, batteries have a cycle life of around 1000 cycles and hybrid capacitors, more than 20,000 cycles. While the ultracapacitors have a usual working voltage range of 1.3 to 2.7 V, hybrid capacitors operate from 1.0 to 2.3 V. The higher energy of hybrid capacitors makes them especially suitable for use in LED lighting and emergency pulse applications, e.g. operation of electric doors and windows.
Type CDLC CarbonCap Ultracapacitor Cells are available with axial, M12 threaded mounting studs on both ends as well as additional mounting options. The new snap-in units are available in 2 and 4 pin versions and are well suited for wind turbine blade pitch control.
The large ultracapacitors handle back-up and pulse power applications such as grid stabilization. They also excel in transportation applications like automotive subsystems, rail system power and utility vehicles. They provide extended power allowing critical information and functions to remain available during dips, sags, and outages in the main power source. These cells can relieve batteries of burst power functions, thereby reducing costs and maximizing space and energy efficiency. Units with axial cylindrical design enables low ESR and high peak currents with an electrostatic storage capability that can cycle a million charges and discharges without performance degradation.
Type CDLC can work in parallel with batteries for applications that require both a constant power discharge for continual function and a pulse power for peak loads. The CDLC delivers the peak power thus reducing the peak current from the battery and extending battery life and reducing battery size and cost.
Availability and Pricing
Both series are available now with prices starting at $10.00 each.
Visit Cornell Dubilier's Power Film Division at www.cde.com
CDHC Hybrid Capacitors are half ultracapacitor and half lithium ion battery. The hybrid capacitors store more than twice the energy of typical ultracapacitors and have high cycle life capability compared to batteries. Hybrid capacitors have more power than lithium ion batteries, but less energy storage. By comparison, ultracapacitors have a cycle life capability of a million cycles or more, batteries have a cycle life of around 1000 cycles and hybrid capacitors, more than 20,000 cycles. While the ultracapacitors have a usual working voltage range of 1.3 to 2.7 V, hybrid capacitors operate from 1.0 to 2.3 V. The higher energy of hybrid capacitors makes them especially suitable for use in LED lighting and emergency pulse applications, e.g. operation of electric doors and windows.
Type CDLC CarbonCap Ultracapacitor Cells are available with axial, M12 threaded mounting studs on both ends as well as additional mounting options. The new snap-in units are available in 2 and 4 pin versions and are well suited for wind turbine blade pitch control.
The large ultracapacitors handle back-up and pulse power applications such as grid stabilization. They also excel in transportation applications like automotive subsystems, rail system power and utility vehicles. They provide extended power allowing critical information and functions to remain available during dips, sags, and outages in the main power source. These cells can relieve batteries of burst power functions, thereby reducing costs and maximizing space and energy efficiency. Units with axial cylindrical design enables low ESR and high peak currents with an electrostatic storage capability that can cycle a million charges and discharges without performance degradation.
Type CDLC can work in parallel with batteries for applications that require both a constant power discharge for continual function and a pulse power for peak loads. The CDLC delivers the peak power thus reducing the peak current from the battery and extending battery life and reducing battery size and cost.
Availability and Pricing
Both series are available now with prices starting at $10.00 each.
Visit Cornell Dubilier's Power Film Division at www.cde.com
Please login to post your comment - click here
Related News
- High linearity power amplifiers boost cellular base station effectiveness
- High rel capacitors resist vibration and operate to 135ºC
- Power current sensing resistors have a TCR of ±0.2 ppm/°C
- Medical power supplies simplify compliance for medical device designs
- Non-dimmable LED driver fits into bulb socket
- Active surge protection filter module complies with DEF STAN 61-5 issue 6 load dump requirement
- Family of nine op amps provide low quiescent current to extend battery life
- Dual module capability boosts IGBT power semiconductors to 90-kW
- 40-V, 2-A buck-boost DC/DC converter fits in 20-lead thermally enhanced TSSOP package
- High capacity industrial battery offers discharge performance benefits
MOST POPULAR NEWS
- Touch screen technology goes behind the display
- Japan prepares to become world's largest solar revenue market in 2013
- Smart grid sensor market looks set to double in size by 2014
- Single-chip solar energy harvester operates wireless mesh nodes
- Bosch drives down fuel consumption - in a salami technique
- World's lowest power Bluetooth smart chip is unveiled
- Ceramic material drastically shrinks power supplies
- Lithium-ion batteries withstand 10.000 charging cycles
- Solar industry capital spending hits seven-year low in 2013 but upturn is on the cards
- 300 percent increase in battery life with low power Bluetooth wireless speaker module
Interview
Technical papers
- 60V Buck-Boost Controller Drives High Power LEDs
- Energy Measurement and Security for the Smart Grid
- Dangers of Aftermarket Counterfeit Battery Packs
- High Voltage Surge Stoppers Ensure Reliable Operation During Power Surges
- Motor-Drive Design made Simple
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V
- Derating of Schottky Diodes
- Heatsink Optimization
- High Performance ZVS Buck Regulator Removes Barriers To Increased Power Throughput
Poll
Power Management
Vishay Intertechnology
Linear Technology
GaN
Power Supplies
NXP Semiconductors
Microcontroller
MOSFET
Battery
STMicroelectronics
International Rectifier
Diodes
Fairchild Semiconductor
Power Supply
Solar
MOSFETs
Batteries
Smart Grid
Energy Harvesting
Power
Analog Devices
Analog
IMS Research
UPS
Microcontrollers
Texas Instruments
Photovoltaic
Intersil
National Semiconductor
Maxim Integrated Products
All material on this site Copyright © 2009 - 2010 European Business Press SA. All rights reserved.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.
This site contains articles under license from EETimes Group , a division of United Business Media LLC.


