Surface mount high-current chokes with a compact design

December 08, 2016 // By Nick Flaherty
TDK has extended its portfolio of surface mount power inductors with a choke series with ten different types.

The inductance values of the new ERU16 B82559*A016 series extend from 1.0 µH to 30 µH and the saturation currents range from 9.2 A DC to 37 A DC.

The outstanding feature of the power inductors is the compact design: With a footprint of just 17.3 mm x 18.7 mm, they have low insertion heights of 7.55 mm (1.0 µH) to 10.95 mm (30 µH), depending on the type. This low-profile design is based on a flat rectangular helical winding technology which results in lower losses. 

The DC resistances are between 1.05 mΩ and 15.35 mΩ. With the new ERU16 types TDK is expanding its broad spectrum of ERU SMT power inductors, which include the existing ERU13, ERU19, ERU20 and ERU25 series.

The new series of high-current chokes is designed for operating temperatures of between -40 °C and +150 °C. Additional third soldering pad results in high mechanical stability on the PCB for use as output and storage chokes in a wide variety of power supply topologies. These include point-of-load (POL) converters, DC-DC converters, high-current switch-mode power supplies, solar converters and xEV applications. The components of the new series are RoHS-compatible and qualified to AEC-Q200.

Further information on the products can be found at www.epcos.com/eru_chokes